Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 3093A Coax - ControlNetTM Quad Shielded Coax For more Information please call 1-800-Belden1 General Description: 18 AWG solid bare copper-covered steel conductor, foam FEP insulation, Duobond(R) IV Quad Shield (100% coverage), fluorocopolymer Jacket. Physical Characteristics (Overall) Conductor AWG: # Coax AWG Stranding Conductor Material 1 18 Solid Dia. (mm) BCCS - Bare Copper Covered Steel 1.016 Total Number of Conductors: 1 Insulation Insulation Material: Insulation Material Dia. (mm) FFEP - Foam Fluorinated Ethylene Propylene 4.318 Outer Shield Outer Shield Material: Layer # Outer Shield Trade Name Type Outer Shield Material 1 Bonded Duofoil(R) 2 3 Duofoil(R) 4 Coverage (%) Tape Bonded Aluminum Foil-Polyester Tape-Aluminum Foil 100 Braid AL - Aluminum 60 Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100 Braid AL - Aluminum 40 Outer Jacket Outer Jacket Material: Outer Jacket Material PVDF - Fluorocopolymer Overall Cable Overall Nominal Diameter: 6.960 mm Mechanical Characteristics (Overall) Operating Temperature Range: -20C To +150C Non-UL Temperature Rating: 150C Bulk Cable Weight: 63.993 Kg/Km Max. Recommended Pulling Tension: 462.613 N Min. Bend Radius/Minor Axis: 69.850 mm Applicable Specifications and Agency Compliance (Overall) Applicable Standards & Environmental Programs NEC/(UL) Specification: CMP EU Directive 2011/65/EU (ROHS II): Yes EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005 Page 1 of 3 10-30-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 3093A Coax - ControlNetTM Quad Shielded Coax EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire & Cable): Yes MII Order #39 (China RoHS): Yes RG Type: 6/U Flame Test UL Flame Test: NFPA 262 Suitability Suitability - Outdoor: Yes Suitability - Burial: Yes Plenum/Non-Plenum Plenum (Y/N): Yes Non-Plenum Number: 3092A Electrical Characteristics (Overall) Nom. Characteristic Impedance: Impedance (Ohm) 75 Nom. Inductance: Inductance (H/m) 0.305133 Nom. Capacitance Conductor to Shield: Capacitance (pF/m) 53.4803 Nominal Velocity of Propagation: VP (%) 82 Nominal Delay: Delay (ns/m) 4.19968 Nom. Conductor DC Resistance: DCR @ 20C (Ohm/km) 91.868 Nominal Outer Shield DC Resistance: DCR @ 20C (Ohm/km) 11.8116 Nom. Attenuation: Freq. (MHz) Attenuation (dB/100m) 1 1.18116 2 1.24678 5 1.6405 10 2.13265 20 3.11695 50 4.9215 100 6.95572 200 9.81019 300 12.0085 400 13.8786 Minimum Structural Return Loss: Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Min. SRL (dB) 5 50 23 Page 2 of 3 10-30-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 3093A Coax - ControlNetTM Quad Shielded Coax Notes (Overall) Notes: Blue available as standard in 1000-ft put-up only. Suitable for Outdoor and Direct Burial applications. Put Ups and Colors: Item # Putup Ship Weight Color Notes Item Desc 3093A X7E1000 305 MT 18.144 KG BLUE X7E C #18 FFEP DBSH SLF 3093A 0101000 305 MT 18.144 KG BLACK C #18 FFEP DBSH SLF 3093A 0102000 610 MT 36.288 KG BLACK CN #18 FFEP DBSH SLF 3093A 0102500 762 MT 43.091 KG BLACK CN #18 FFEP DBSH SLF 3093A 0105000 1,524 MT 88.451 KG BLACK CZ #18 FFEP DBSH SLF Notes: C = CRATE REEL PUT-UP. N = FINAL PUT-UP LENGTH MAY VARY -0% TO +10% FROM LENGTH SHOWN. Z = FINAL PUT-UP LENGTH MAY VARY (+ OR -) 10% FOR SPOOLS OR REELS AND(+ OR -) 5% FOR UNREEL CARTONS FROM LENGTH SHOWN. Revision Number: 2 Revision Date: 09-04-2013 (c) 2013 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities and in our Distributor's inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 3 of 3 10-30-2013